Hello,
I have a Windows Server 2003 R2 x64 server running Exchange 2007 that hangs when attempting to reboot. It has done this three times, and it requires a manual power-down of the server. Doug
↧
Windows Server 2003 Hangs on Reboot
↧
AT.exe Pauses 20+ seconds
This is kind of weird. I use the AT task scheduler on a Windows Server 2008 SP2 (standard) system to run a status gathering program. If I simply enter AT to a command prompt (run as administrator), one of my servers takes 20+ seconds before
it returns the outstanding jobs. A second, similarly configured, server takes about 8 seconds. Any ideas why this long pause is happening? The Task Scheduler service is configured for Automatic startup and is started.
↧
↧
Server 2008
I had recently set up server 2008 at my house, I was able to connect another computer with no problems but when I turned on my XBOX there was an error connecting to XBOX Live. I had XBOX working prior to installing server. After manually entering an IP
address outside of the scope I set on the server it worked fine. My cell phone also had issues, it would sense WIFI but would not receive data over it, it was connected to an IP address within the scope, I cannot manually set that IP. Any Ideas?
↧
CertEnroll::CX509Enrollment::p_InstallResponse: ASN1 bad tag value met. 0x8009310b (ASN: 267)
Hi
Iam using IIS 7.0 in windows server 2008
Initially i had installed a server certificate using the below procedure
[Steps followed for installing]
1) Open IIS Manager and navigate to the level you want to manage.
2) In Features View, double-click Server Certificates.
3) In the Actions pane, click Complete Certificate Request.
4) On the Complete Certificate Request page, in the File name that contains the certification authority's response text box, type the path of the file that contains the response from the CA, or click the browse button (…) to search for the file.
5) Type a friendly name for the certificate in the Friendly name text box, and then click OK.
---
Then i removed the same certificate using the below procedure
[Steps followed for removing]
1) Open IIS Manager and navigate to the level you want to manage.
2) In Features View, double-click Server Certificates.
3) Select the server certificate you want to remove and click Remove in the Actions pane.
Note
Removing a server certificate may cause dependent services or programs to stop working.
4) In the Confirm Remove dialog box, click Yes.(i dont remember whether this 4th step has occured while i was doing)
-----
Now when i try to install the same certificate using the "[Steps followed for installing]" procedure, I am getting the below error content in a dialog box after step 5
[Error content ]
---------------------------
Complete Certificate Request
---------------------------
There was an error while performing this operation.
Details:
CertEnroll::CX509Enrollment::p_InstallResponse: ASN1 bad tag value met. 0x8009310b (ASN: 267)
---------------------------
OK
---------------------------
Anyone please let me know how to solve the issue
↧
install KB2443685 for new DST settings
Dears,
I need to install KB2443685 for new DST settings, but there is no one for windows server 2008 R2 SP1, the only available one is for "Download the Update for Windows Server 2008 R2 x64 Edition (KB2443685) package now" .And it is support Windows server 2008 R2 only , And when I install it its shows “the update is not applicable to your computer”.
Thank you,
↧
↧
Domain Server 2008 Blue scree issue
Having problem on Domain server 2008.
ubable to login (not even able to see login screen) shows blue screen with a message.
from the whole message i am writing the parts which can help experts to find the problem
PAGE_FAULT_IN_NONPAGED_AREA
Technical information:
*** STOP: 0x00000050 (0XFFFFF880009A07A4, 0X000000000001, 0XFFFFF8000C0DBD27, 0X00000000000000)
Abbas
↧
Install snmp service in all the computer of a domain
Hello,
I need to install the snmp service in all the computers of my domain, these are mainly xp and w7 x64. My domains controllers are windows server 2008.
How can I achieve this? Perhaps with GPO or a script?
Can anybody help?
Thanks in advance.
Regards.
↧
Event id: 637 is not triggered after the remote desktop user deletion
Hello,
Suddenly three of the users from the Remote desktop users group has been deleted, but i am not able to find the Event:637 in the security event log. However, i had test to delete one user from the remote desktop users group but the event id:637 has triggered and found.
where should i have need to check who is the user has deleted?
Thanks
Yasir
Suddenly three of the users from the Remote desktop users group has been deleted, but i am not able to find the Event:637 in the security event log. However, i had test to delete one user from the remote desktop users group but the event id:637 has triggered and found.
where should i have need to check who is the user has deleted?
Thanks
Yasir
↧
error log after login on server 2003
Hi there,
When i started Windows Server 2003 (Enterprise Edition) & logged in, this error log appeared on my desktop.
I'm unable to understand this log if it's related any hardware or OS issue.
Any help would be appreciated.
Regards,
Shahabuddin Ansari
↧
↧
Convert Basic Disks To Dynamic; Windows Server 2003
We have three basic disks - we want to shift storage space from one disk space to another drive as the drive is getting full, I want to make sure of the followings:
1. Will it affect the data in the drive after converting to dynamic disks?
2. Will the Security and Sharing permissions be affected? As it is a file server.
3. The files shares are connected to another DFS server as well, will this be affected?
Please advise,
Regards
MCITP: Enterprise Administrator |MCITP: Server Administrator MCITP: Enterprise Support | MCTS: Exchange 2007, 2010, OCS2007 | UC Specilized
↧
Don't see my drive's with service account.
Heey,
When i logg in with with my service account i can't see my drive's at "Computer".
On my other server i logg in with an service account with the same configuration it works.
Does anyone know where to look, or how to fix this.?
Wobbes.
↧
DCOM was unable to communicate with the computer x.x.x.x using any of the configured protocols.
I get this message on a domain controller that i just put into production, running windows server 2008 r2, AD 2003. This gets generated almost everytime i reboot the server. It occurs 4 times in succession relating once to each of our external dns forwarders. I have checked that DCOM uses tcp/ip. I do not believe this to be impacting us significantly however i do prefer to know what this means and how to prevent it.
Thanks
Thanks
↧
Hotfix 2600100 won't install despite meeting Prerequisites
I'm trying to install a Microsoft Hotfix (http://support.microsoft.com/kb/2600100) on a Windows Server 2k8 box which has .Net Framework 3.5 SP1 installed, but its telling me
"None of the products that are affected by this install would be affected"
All prerequisites have been met, and it works on other Windows Server boxes which have .Net 2.0 Framework and .Net 3.5 Framework installed separately. Has anyone encountered something like this before?
↧
↧
I am getting some errors in a server 2003R2 SP2's application event viewer related to LoadPerf.
Windows 2003 R2 SP2
Event ID:3001
The performance counter name string value in the registry is incorrectly formatted. The bogus string is 1848, the bogus index value is the first DWORD in Data section while the last valid index values are the second and third DWORD in Data section.
Data: 0000: 00000738 00000736 00000737 000001af
Event ID:3009
Installing the performance counter strings for service WmiApRpl (WmiApRpl) failed. The Error code is the first DWORD in Data section.
Data: 0000: 00000020 000011b3
Event ID:3013
Unable to update the performance counter strings of the 009 language ID. The Win32 status returned by the call is the first DWORD in Data section.
Data: 0000: 00000020 00000c99
I have tried the lodctr /r command and this does not fix it.
I have also followed Bulletin kb/300956 with no luck fixing the issue. After a reboot I still get the same error messages.
Any guidance would be greatly appreciated
↧
Missing Local DTC in Windows Server 2008 R2
Hi All, i need some help about Distributed Transaction Coordinator services
I have developed some application using K2 Blackpearl with Sharepoint 2010. After workflow designed, then deploy workflow. But when deployment failed for first deploy, when deploy for second time deployment successfull. After application is checked, some workflow not deployed. I tried to reinstall MSDTC via command, when deploy again but deployment failed with different message error, i try to check Local DTC in Component Services--> Distributed Transaction Coordinator, Local DTC is missing. Try to reinstall MSDTC based suggest from stackoverflow.com/questions/11094206/missing-local-dtc-in-msdtc but no luck.
My question is how to get back Local DTC? Because local DTC is prerequirement for K2 Blackpearl.
Please anyone that expert in Microsoft Windows Services and ever develope some application based Microsoft to help me to resolve my problem.
Thank you, many many thank you.
↧
windows server 2012 Network Performance receive meter issue
hello,
Everything seems to be working fine but receive meter doesn't work, it shows R: 0 kbps. I tried to restart the computer still no luck.
Thanks
↧
ScandAll Pro Version 1.8.1 Win Server 2008 Standard
Hi,
I have problems with running the scanner software for a Fujitsu fi-6110 document scanner.
I'm using two other scanner softwares which are working without any problems.
Fujitsu support doesn't know any solution.
I'm using ThinClients. The scanner is connected directly to the server.
Any ideas how I can setup the system to make the software work?
Kind regards
↧
↧
Remove parent domain
in our company we have one parent domain called abc.com and a child domain called xyz.abc.com, since we have one child domain now we are planing to remove the parent domain and go with the domain name xyz.com and we need do to do this seamlessly to the users because we have around 150 users, so can anyone please advise how to do this without disturbing users.
note: all the servers are windows server 2003
↧
Windows Server 2008R2 install.win
Greetings.
I am looking to extract files from the Windows Server 2008R2 install.win file. I can access it fine, but cannot seem to find out what each folder (1-8) corresponds to which version of Windows. In other words, I want to select the correct file versions from the DVD for Windows 2008R2 64 bit. Thank you in advance for any suggestions you have.
Cheers, Rick
↧
Unable to install Windows updates in Windows 2008 R2
Getting Error Code 8000FFFF.
In the past, I've been able to update this server with no problem, this started happening last month. I have tried several steps found on different blogs and forums, but am still experiencing the issue.
Thanks
JScott2
↧